MIU-1500 / CompuCount User’s Guide
Page 23
Figure 3
Insert the paperclip into the reset switch access. You should be able to depress a button under the
access hole. On some versions, the switch may be difficult to access. The switch
in Figure 2 is particularly difficult to reach as the switch is deep beneath the case.
You will need to feel around with the paperclip until you reach a button, or
remove the top of the case.
With the paperclip inserted, you should be able to depress a button inside the
case. Hold the button down with the paperclip, while plugging in the power
adapter to the MIU-1500. When you plug in the power adapter, the red Power
indicator should flash on and off. If the power indicator does not flash on and off,
remove the power adapter and make sure you are depressing the reset button.
Release the button and the red power indicator should turn off for a few seconds, and then appear on.
The MIU-1500 is now set to the factory default settings and should have the following network settings:
IP Address: 192.168.1.55
Subnet Mask: 255.255.255.0
