10
© Copyright Muuntosähkö Oy
–
Trafox
Superintend IMD
•
The Alarm menu has two levels. The first level displays the reason for the alarm
and the second level shows the alarm start time, the measured parameters, and
alarm limits.
•
The Setup menu mainly has two levels. The first level displays the valid
parameter, which can be changed on the second level.
Hereafter, the screen modes are called as follows:
•
The
main level
of the menu is the topmost menu level (MONITOR, SETUP and
ALARM)
•
The
menu level
is the sub-level of the aforementioned, and it is browsed using
the button
•
The
screen mode
is the mode following the menu level, and it displays the value
of the parameter/time; also displays a stopped AutoScroll mode. The screen
mode can be accessed from the menu level by pressing the T button.
•
The
AutoScroll
mode is in use in the Setup menu items where there are several
parameters to display. In that case, the displayed parameters change every few
seconds. You can stop the display with the button and return from the screen
mode to the AutoScroll mode with the button. Use the T button to go to the
edit mode or screen mode.
•
The
Edit mode
is a Setup menu mode where the parameters to be displayed can
be changed. In the Edit mode, the parameter to be changed flashes and it can be
changed with the button. If there are several parameters to be changed in the
same screen, you can move to the next one by pressing the button. After the
editing is completed, press the T button, after which the values given must be
approved by selecting “Yes” in the Confirm menu and pressing T. By selecting
“No” or pressing the
button in the conformation stage you return to the
previous mode without saving the changes.
As a rule, the buttons function as follows:
Moving to the next parameter on the menu level and screen level. Increases the
parameter on the edit level. In the AutoScroll mode, stops the display.
Moving to the next menu on the main level. Moves to the next editable
parameter on the edit level. Also
a general “reject button”. Returns to the
previous mode from all modes. Pressing the button an appropriate number of
times takes you to the default mode of the main menu (insulation
resistance/capacitance) from any mode.
A gene
ral “approval button”. On the menu level, takes you to the AutoScroll or
edit mode. On the edit level, approves the changes made. Pressing the button
in the first three items of the Monitor menu and approving the start of the test
begins the system test.
