Tractel TIRAK T 1020 P, Оригинальная инструкция по эксплуатации

Страница: 7 / 36

7
Type TIRAK
®
Dead-
Rope Rated- Dimensions
Hoist Capacity of Output rope weight
speed Current
drive Ø approx. a b c
TIRAK
®
Model kg
2)
m/min –
3)
kW A mm kg
4)
mm mm mm
X 300 P 300 9 D 0,5 1,6 8 28 437 272 285
X 302 P 18 D 0,9 2,6 8 28 437 272 285
X 301 P 9 W 0,5 4,5 8 29 476 272 285
X 400 P 400 9 D 0,7 1,6 8 29 437 272 285
X 402 P 18 D 1,4 2,5 8 30 485 272 285
X 401 P 9 W 0,7 5,5 8 32 485 250 220
X 500 P 500 9 D 0,9 2,8 8 39 485 297 250
X 502 P 18 D 1,8 5,0 8 39 495 297 250
X 503 P 9/18 D 0,9/1,8 2,8/5,1 8 41 495 297 250
X 501 P 9 W 0,9 6,5 8 43 546 297 256
X 720 P 700 9 D 1,5 3,9 9 43 546 297 256
X 820 P 800 9 D 1,25 4,0 9 48 525 297 285
X 822 P 18 D 3,5 7,0 9 60 563 307 285
X 823 P 9/18 D 1,75/3,5 4,5/9,0 9 61 563 307 315
T 1020 P 800 9 D 1,9 4,6 9 74 577 320 315
T 1023 P 9/18 D 1,9/3,6 5,5/9,5 9 84 645 320 315
X 1030 P 1000 9 D 1,9 4,6 10 48 525 297 285
X 1032 P 18 D 3,6 9,5 10 60 563 307 285
X 1033 P 9/18 D 1,9/3,6 5,5/9,5 10 61 563 307 315
X 2050 P 2000 6 D 2,2 6 14 85 650 400 340
X 2052 P 12 D 5,5 12 14 110 660 400 350
3.6 Technical Data
3.6.1 TIRAK
®
Hoists
Table 2
1) Hoist to 9 m/min = Driving group 1B
m
, Hoists over 9 m/min = Driving group 1C
m
2) If the capacity is not sufficient in direct pull, multiply it by reeving the rope according to the block and tackle principle.
3) D = 415 V three phase current; W =110/220 V single phase current.
4) Weight without wire rope.
a
b
c
for max. TIRAK
®
Dead
Fall Dimensions
Capacity wire rope Rope weight
arrest device
speed Ø approx. a b c
BLOCSTOP
®
Model kg
1)
m/min mm kg mm mm mm
BSA 15-301 500 – 8 4 286 191 76
BSA 20-303 800 – 9 6 350 222 76
BSA 20-330 1000 – 10 6 350 222 76
BSA 35-305 2000 – 14 10,5 395 313 90
BSO 500 500 18 8 4,7 214 121 131
BSO 1020 800 18 9 6 251 140 131
BSO 1030 1000 18 10 6 251 140 131
BSO 2050 2000 18 14 14 408 150 183
Safety rope
Fig. 3
Table 3
3.6.2 BLOCSTOP ® Fall arrest device
STOP
AUF
STOP
AUF
STOP
AUF
BSA 15-301 BSA 20-303 BSA 35-305 BSO 500 BSO 1020 BSO 2050
BSA 20-330 BSO 1030
Lifting rope
Design according to DIN 15 020, transmission group 1 B
m
or1 C
m
.
Technical modifications reserved.
The BLOCSTOP
®
-Models BSO… can
if desired be equipped with a limit
switch which stops the downward travel
of the assigned hoist in the event of
the BLOCSTOP
®
being closed.