background image

 

2

PRIORITY INSTRUCTIONS 

 

1.  Before installing and using this unit, to ensure safe, efficient use of the unit, be sure you have read 

and  fully  understood  the  information  and  instructions  given  in  this  manual.  A  copy  of  this  manual 
should be made available to every operator. Extra copies of this manual can be supplied on request. 

2.  Do not use the unit if any of the plates mounted on the unit are missing or if any of the information on 

the  plates,  as  indicated  at  the  end  of  the  manual,  are  no  longer  legible.  Identical  plates  will  be 
supplied on request; these must be secured on the unit before it can be used again. 

3.  Make  sure  that  all  persons  operating  this  unit  know  perfectly  how  to  use  it  in  a  safe  way,  in 

observance of all safety at work regulations. This manual must be made available to all users. 

4.  The  positioning  and  commissioning  of  this  appliance  must  be  carried  out  under  conditions  that 

ensure installer safety in compliance with the relevant regulations. 

5.  Each time, before using the unit, inspect the unit for any visible damage, as well as the accessories 

used  with  the  unit.  Never  use  an  appliance  that  is  not  obviously  in  good  condition.  Returns  the 
appliance to the manufacturer for servicing if any anomalies arise that have no connection with the 
state of the battery; 

6.  Protect your appliance from any form of impact, especially the display unit. 

7.  The unit must never be used for any operations other than those described in this manual. The unit 

must  never  be  used  to  handle  any  loads  exceeding  the  maximum  utilization  load  indicated  on  the 
unit. It must never be used in explosive atmospheres. 

8.  This appliance should never be used for man-riding applications without a thorough prior check that 

the utilization coefficients required for personnel safety have been applied, and more generally that 
the safety regulations for the load line on which it has been installed have been applied. 

9.  Tractel® declines any responsibility for use of this unit in a setup configuration not described in this 

manual. 

10. Tractel®  declines  any  responsibility  for  the  consequences  of  any  changes  made  to  the  unit  or 

removal of parts. 

11. Tractel® declines any responsibility for the consequences resulting from disassembly of the unit in 

any way not described in this manual or repairs performed without Tractel® authorization, especially 
as concerns replacement of original parts by parts of another manufacturer. 

12. If the unit is to be definitively removed from use, make sure the unit is discarded in a way which will 

prevent any possible use of the unit. All environment protection regulations must be observed. 

13. Any operation of this appliance in conjunction with supplementary equipment relaying signals on an 

operating  system  must  be  preceded  by  a  risk  analysis  related  to  the  operating  functions 
implemented, carried out by the system user or assembler, and all appropriate measures are taken 
as a consequence. 

14. Certified in compliance with European regulations, this appliance should be checked for compliance 

with the regulations of any other country where it might be used, prior to being commissioned there. 

 

 

As part of the continuous improvement of the quality of its products, TRACTEL® 
reserves the right to change, without notice, the characteristics of the products covered 
in this manual. 

Содержание Dynarope HF36/3/LPT



















Отзывы: