NX Important instructions
• This clamp can also be used for hardened steels.
• The plate or piece to be lifted must always be
driven home into the throat of the clamp.
• No limit regarding surface hardness of loads to be
lifted.
• Never use on greasy or oily pieces.
• Do not use the automatic grasping mechanism on
fragile loads.
• To avoid injury, ensure the clamps are always
unlocked when not in use (closed jaws).
• The minimum weight of lifting load should be
equal to 5% of the clamp’s WLL (e.g. if clamps
WLL is 1 ton, then minimum weight is 100 lbs.).
This value is given for a clamp in new working
order and respecting Tractel
®
Inc. conditions of
use and recommendations. Consult Tractel
®
in
case of loads with weight less than the minimum
recommended value.
• Lifting clamps are not suitable for creating
permanent joints.
• Never lift more than one plate at a time.
•
Apply the downgradation if necessary
• Working temperature: -20° to +80°C (4º to 176ºF).
NX - Examples of lifting applications see page 15
NX - Lifting details see page 15
WARNING
www.tractel.com
©
T
ra
c
te
l
®
P
4
1
0
2
N
A
-
r
e
v
1
-
1
1
/2
0
1
0
23
