Track It TV™ - O
PERATION
&
M
OUNTING
Overview
Deck or Limited Area Mountings
Base Adapter
screwed to
8” wood 2x4
8” 2x4
secured
to deck
dish
LNB
(1)
Deck Mount
large hose
clamp secures
4 wire stays
with swages
on ends
4 wires with
turnbuckles
Note:
slightly offset
2x4 allows
required air
circulation &
moisture to
escape from
bottom of
Base Adapter:
do not seal
cabin house looking forward to bow
options to move dish higher -
(extend PVC case and upper
support alternatives)
forward to bow
cabin house side view
grab rail
cabin house top view
dish
unit
stays
stays
grab rail
Arch
Side
View
Arch View Looking Forward
Note:
slightly offset
2x4 allows
required air
circulation &
moisture to
escape from
bottom of
Base Adapter:
do not seal
Forward
To Bow
arch top
18” wood 2x4
secured to arch
Base Adapter
screwed to 2x4
aluminum
braces*
large hose
clamp
dish
LNB
(2) Limited Area
Mount
* Aluminum braces may be either 3/8” x 1” aluminum strap,
or 3/4” aluminum electrical conduit with ends flattened
(1)
This shows a typical mounting on a cabin house deck top, utilizing wire stays and
turnbuckles to support the top of the unit. Four wire stays must be used. There are
options to move dish higher off deck.
(2)
This shows a limited area mounting utilizing aluminum braces to support the top of
the unit. There is an option for fewer supporting aluminum braces.
Revised 3/15/2007
Page 9
