Track It TV™ - O
PERATION
&
M
OUNTING
Overview
Track It TV™ Shipped Parts
Shaft turns: rotated by motor
(Caution: do not twist by hand)
Large & small hose clamps*
can attach unit to railing
Warranty voided if:
1. Rubber shaft seal removed
2. Screw, clip or 720º limit cord removed
Split vinyl hose under small
hose clamps can protect
SS rails & prevent slippage
#8 x 3/4” Screw can secure Base Adapter
to Tracking Unit – DO NOT GLUE BASE
ADAPTER INTO BASE OF UNIT
TITV
Unit
Base
Adapter
Rubber shaft seal – prevents water entry
Large & small hose clamps*
can attach unit to railing
1/4” x 3” Bolts (2) can attach Base
Adapter to L-Bracket
Large fender washers (2)
Lock nuts (2)
Small hose clamps* (2) can attach
L-Bracket to vertical stanchions
or mounting poles
Aluminum
L-Bracket
(3/16” x 1”)
Track It TV
™
Operation Manual
TITV
cards
Plus additional instructions
in zip lock bag
(Reset) Find
Right
(2
nd
Func)
Left
LED light
2
nd
Func
Reset
Find
Right
Left
Track It TV™
Button
Box
Coupler
40’ Control Cable
(6-wire phone cable)
12V to 24V
DC Power
Cable
(+ = red)**
Level to make FMTV
tracking unit vertical
Note: RJ11 plugs allow removal of Button Box
to facilitate concealed control cable installation
Base
Adapter
“Split Loom” corrugated cable
protects wire from UV damage
(only sample length supplied)
Hose clamp secures seal to rotating shaft
1/4” – prevents binding and chafe of limit cord
720º limit cord –
prevents damage to
Internal wires
SHAFT
SHAFT
SEAL
CLIP
CORD
SCREW
Detail
3 amp fuse and holder
for permanent 12V power
3 Ancor connectors for
permanent 12V power
Top view – 3/8” holes
allow some bolt movement
to help make unit vertical
* NOTE: The 6 SS hose clamps
supplied with the unit are non-
magnetic – ONLY USE NON-
MAGNETIC CLAMPS NEAR
COMPASS!
** Note: TITV
Tracking Unit is
polarity protected
Compass located inside case in this area*
Revised 3/15/2007
Page 3
