Track It TV™ - O
PERATION
&
M
OUNTING
Overview
Extending or Shortening Button Box Control Cable
RJ11
Coupler*
(“reversing”)
6-wire
RJ11
plug*
Tab up
6-wire flat phone
cable extension
blue wire
6-wire
RJ11
plug*
Tab up
6-wire
RJ11
plug*
Tab up
6-wire
RJ11
plug*
Tab up
RJ11
Coupler*
(“reversing”)
Button
Box
blue wire
6-wire flat phone
cable to TITV unit
blue wire
The drawing below shows how the button box control cable can be extended if needed,
using another length of 6-wire modular flat telephone cable:
Also, the control cable from the unit can be made shorter, by cutting and crimping on a
new 6-wire RJ11 plug.
Major Components for mounting
32”
5”
Dish On
Shaft
Rotates
Compass
Inside Here
Bottom
Support
Here
(1)
TITV
Unit
(10 lbs.)
(3)
Base
Adapter
(4)
L-Bracket
Top
Support
Here
14”
(2)
Dish
(5 lbs.)
18”
8”
The four major components for mounting are shown in the drawing below:
(1) Track It TV™ Unit; (2) Satellite TV Dish; (3) Base Adapter; and (4) L-Bracket.
Important dimensions and weights
are shown in the drawing. Dish
dimensions are typical, but can vary
several inches from those listed. The
base adapter, if used, fits inside the
bottom of the unit as illustrated. The
L-bracket, if used, is bolted to the
base adapter. The dish is mounted on
the rotating shaft that rotates to track
the satellite as the boat turns, guided
by the compass inside the shaft. The
unit must have both top and bottom
supports when mounted as shown.
Revised 3/15/2007
Page 4
