Trace2O Metalyser HM5000, Инструкция по эксплуатации

Страница: 8 / 48

8 www.trace2o.com
Metalyser HM5000 Benchtop Instruction Manual v1.0
4. INSTRUMENT INSTALLATION
Remove all of the packaging from the HM5000 instrument and
ensure that all of the contents are present. If any items appear to be
missing, please contact your local distributor or Trace2o.
Set the instrument on a firm level surface.
Connect the lead of the mains adapter to the socket marked 12V DC
on the back of the instrument, and plug into a wall socket.
Nitrogen supply
If a nitrogen supply is to be connected then there are several
connection options depending on the supply available, but the supply
must have an external in-line regulator or adjustable tap.
Option 1: 4mm O/D Rigid tubing
4mm O/D rigid tubing can be connected directly
to the N
2
inlet port on the back of the HM5000
without the use of additional tubing or adapters.
Option 2: 10mm O/D Rigid tubing
The supplied 20cm length of 4mm O/D rigid tubing
should be connected to the N
2
inlet port on the back
of the HM5000. The supplied adapter can then be
used to connect this to 10mm O/D rigid tubing.