Trace2O Metalyser HM5000, Инструкция по эксплуатации

Страница: 23 / 48

23
Metalyser HM5000 Benchtop Instruction Manual v1.0
www.trace2o.com
Platform
The sample elevation platform must be lowered to facilitate insertion or
removal of a sample, or addition of a standard. The platform must be raised
during analysis so that the electrodes are submerged in the sample.
To raise the sample platform, click the Raise button.
To lower the sample platform, click the Lower button.
The current position of the sample platform is shown in the ‘Platform’ panel of
the info pane at the bottom of the Metaware window. The panel will display either
‘Down’, signifying that the platform is lowered, ‘Up’, signifying that the platform is
raised, or ‘?’, indicating either that the platform is in motion, or that there is a fault.
The HM5000 cannot run analyses with the sample platform in the down position.
If the ‘Start Analysis’ button is clicked and the sample platform is in the ‘Down’
position, the Metaware will inform the user by displaying the message:
Platform not raised. Raise platform and continue?
If Yes is clicked, the platform will be raised and the analysis will commence.
If No is clicked, the analysis will be cancelled.