Trace2O Metalyser HM5000, Инструкция по эксплуатации

Страница: 13 / 48

13
Metalyser HM5000 Benchtop Instruction Manual v1.0
www.trace2o.com
Connecting/disconnecting the electrodes
The electrodes are all pre-fitted, but may need to be removed during the course
of analysis, for example when switching between the two working electrodes.
To fit the electrodes, simply align the white arrow on the black connector shroud with the
arrow on the socket and gently push the electrode. A quiet double click should be heard.
Gently pull on the top of the black holder of the electrode to ensure it is fully connected.
To remove the electrodes, pull back on the black connector
shroud and the connector will pull off.
Avoid knocking the stirrer whilst attaching or removing electrodes.
Insert the electrodes into the appropriate sockets as indicated
by the electrode letters printed on the sensor module.