Metalyser
®
Portable HM1000
Instruction Manual v 5.0
17
Backlight
Your Metalyser
®
is equipped with a backlight to aid viewing in poor lighting
conditions.
To change the backlight settings follow the steps below:
•
From the main menu, select
System
•
From the system menu, select
Backlight
1
The battery life will be shortened in this mode.
•
Highlight required setting and press
<OK>
•
Press
<cancel>
to return to main menu
Language Selection
The Metalyser
®
comes with English, French and Spanish languages pre-
installed. To Change the language follow the steps below:
•
From the main menu, select
System
•
From the system menu, select
Language
•
Highlight required language and press
<OK>
•
Press
<cancel>
to return to main menu
Auto switch off
The Metalyser
®
can be set to automatically switch off after ten minutes of
inactivity. This is recommended to extend battery life. To change this setting
follow the steps below:
•
From the main menu select System
•
From the system menu select Auto
switch off
•
Highlight required setting and press
<OK>
•
Press
<cancel>
to return to main menu
ON
The backlight will be on at all times
1
OFF
The backlight will be off at all times
AUTO
The backlight will switch on when a key is pressed or the screen
refreshes. It will turn off after five seconds of inactivity
