TR-Electronic CD_-582 Series, Руководство по безопасности

Страница: 26 / 29

Checklist, Part 1 of 2
 TR-Electronic GmbH 2019, All Rights Reserved Printed in the Federal Republic of Germany
Page 26 of 29 TR - ECE - BA - GB - 0142 - 01 06/12/2019
Continued
Sub-item Note Reference yes
Preset adjustment function
● Legacy mode: The preset
adjustment function may only be
executed when the axis in question
is at standstill
● Ensured the preset adjustment
function can not be triggered
unintentionally
● After execution of the preset
adjustment function, the new
position must be checked before
restarting
● Interface-specific User Manual
(Checklist, part 2 of 2)

Device replacement
● Ensure that the new device
corresponds to the replaced device
● All affected safety functions must be
checked
● Chapter Replacing the measuring
system, Page 24
● Interface-specific User Manual
(Checklist, part 2 of 2)

Verification and validation of the
programming system
(Control system / Software)
● Ensure that all functional and
performance related requirements
for the safety-related parts of the
programming system are met.
Particularly, this applies to changing
the program version.
● Safety of machinery – safety
related parts of control systems
– DIN EN ISO 13849-1
– DIN EN ISO 13849-2
