TQC SATO SK-L200THII, Руководство пользователя

Страница: 5 / 27

5 |
3. MODE key
•
Used to display Current Date and Time, ID, Logging Interval, Logging Option, Warning Thresholds or
Preset Start.
4. REC/STOP key
•
Pressing the REC/STOP key for two seconds or more while measuring will start logging.
•
Pressing the REC/STOP key for two seconds or more will end logging and return to measuring
temperature and/or humidity.
•
Pressing the REC/STOP key upon setting will confirm the newly set value.
5. Power ON/OFF key
•
Pressing the POWER ON/OFF key will turn the unit on or off.
•
Pressing the POWER ON/OFF key while the unit is off will turn it on.
•
Pressing the key once again will turn off the unit.
NOTES: Be sure to press and hold the Power ON/OFF key for one second or
more. This feature prevents the unit from being turned on or off accidently.
LCD display
(For SK-L200T II and SK-L200TH IIα)
1. Alphanumeric display (LCD)
Displays the current reading of temperature and/or humidity
or setting information. No humidity will be displayed on an
SK-L200T II (temperature) model.
2. Alarm
Lights up when the upper or lower threshold is reached.
3. Hi and Lo
The indicator "Hi" lights up when the upper threshold is
exceeded. The indicator "Lo" lights up when the lower
threshold is exceeded.
4. mark
Flashes when the battery power becomes low. If it happens, immediately replace the batteries. Data will be
retained even if the batteries are replaced, but logging will stop the moment the batteries are removed from
the unit and all settings will be reset to the defaults.
5. TIME
Lights up while a date and time is being set or while they are displayed.
6. OUT
Lights up while the temperature and/or humidity data is being transmitted.
7. RES
Flashes while in standby for preset start.