TQC SATO SK-L200THII, Руководство пользователя

Страница: 18 / 27

18 |
Repeatedly (overwriting)
The Datalogger overwrites the existing data from the start once the 8100 lines of data are recorded. This is ideal
for collecting data during a certain period.
Be sure to make a note of the time logging ends. You will need it to analyze the data with the Datalogger for
Windows.
Memory indicator
Logged data : 1 to 1000 lines
: 7001 to 8100 lines
: 8101 to 9000 lines
: 9001 to 10000 lines
From here, the dim bar is shifted to the right in succession.
Ends at… (limited amount)
With this logging option, you can specify the end-point for the Datalogger to stop logging. This setting is ideal
when you want to limit the amount of data to be collected
Memory indicator (example: end-point is 5500)
Logged data : 1 to 1000 lines
: 3001 to 4000 lines
: 5500 lines
By pages (partitioning)
The storage memory is partitioned into four blocks, each having the capacity to store 2000 lines of data. This
enables the Datalogger to perform.
four different tasks in sequence while storing each task’s data in one of the four different memory blocks
(pages). This is ideal when you want to collect data from multiple sites using one Datalogger.
TIPS: The memory is used on a page-by-page basis. Therefore, even if there are less than 2000 stored data
lines at the end of logging (REC/STP pressed), the entire page containing any number of lines becomes
unavailable for further use. Upon logging again, the new data will be stored in a different unused
page. When the four pages are used up, erase all the data before performing the next logging.