TQC SATO SK-L200THII, Руководство пользователя

Страница: 2 / 27

2 |
•
Displays the approximate amount of memory currently used. (
→
P.44)
Easy to determine how much more logging is possible.
•
Probes can be interchangeablely used.
The sensors are fully compatible among the series models so that, in case
of probe failure, it is easy to replace by interchanging with another probe.
•
14 logging intervals (
→
P.42)
The logging intervals available are in seconds (1, 2, 5, 10, 15, 30) and in
minutes (1, 2, 5, 10, 15, 30, 60, 90).
•
ID on each Datalogger (
→
P.40)
The ID numbers of 1 to 9 can be set for easy identification when multiple
Dataloggers are used.
•
No data loss even if the batteries go dead
There is no data loss even if there is a power failure, as the logged data is
stored in the EEPROM.
•
Warning display for upper/lower limit of temperature or humidity
The Alarm mark lights on the LCD if the temperature or humidity exceeds
the preset threshold. This helps to prevent damage to your product.
•
Easy to use software program for data analysis
The logged data can be fully utilized by plotting in graphs and displaying
in real time. Data can also be saved in CSV format and analyzed by
commercial spreadsheet software.
2. WHAT'S IN THE BOX?
The following items are included in the box.
Check the box contents and place a check mark in the box next to each
item.
If you find any item missing, please contact the store where you purchased
this product or our Service Network.
□
Datalogger 1
□
Hand strap 1
□
USB port cap (Factory set) 1
□
This Instruction Manual 1
□
Software program CD 1
□
USB cable 1
□
Alkaline batteries, AAA/R6 2
* Probe is an option and has not been included in the box.