automatic-film-applicator-ab3120-m44 - Page 6 of 23
6 |
2.6
Care, Maintenance, Repairs
•
Always make sure the instrument is connected to an earthed socket.
•
Maintenance and inspection should be carried out at the correct intervals.
•
Operating personnel should be informed before starting with maintenance or repair work .
•
Always make sure the instruments power is turned off and the instrument is not connected to a socket
while adjusting any electrical component whenever maintenance, inspection or repair work is done.
•
Do not open the instrument. In case of malfunction always consult the manufacturer.
•
Never touch electronics or circuit boards when not ESD secured.
2.7
Modifications to the Equipment
•
Any modifications or additions or alterations to the instrument may solely be made with permission from
the manufacturer.
•
All measures involving modifications require written confirmation of approval from TQC.
•
Instruments which are not in fault-free condition must immediately be switched off.
•
Only use replacement parts from the original supplier. Parts used from other sources aren’t guaranteed to
take the loading and meet the safety requirements.
2.8
Cleaning of the Instrument and Disposal of Materials
•
When in use it is not always possible to avoid some spill of paint on the work surface.
•
Try to keep the instrument as clean as possible to prevent distortions of functions.
•
To clean the instrument properly use a suitable solvent to dispose remains of paint or ink.
•
Wear gloves during cleaning; Don’t spill an overdose of solvent during cleaning.
•
Cleaning materials must always be used and disposed of correctly.
3
TRANSPORT AND STORAGE
3.1
Packing
Please take note of pictorial symbols on the packing.
3.2
User: Check on Receipt
Check packing for damage
After unpacking check complete supply.
3.3
Reporting Transport Damage and Documentation
Any damage should be documented as accurately as possible (possibly photographed) and reported to the
relevant insurers or, in the case of sales "delivered to customers works", to the supplier.
3.4
Storage and Protective Measures when not in use
The instrument must be stored in a dry (± 40%rH) place at a temperature between 10 - 40°C.
The storage period should not be longer than 3 months.
Store instrument in the original packing if possible.
