automatic-film-applicator-ab3120-m44 - Page 14 of 23
14 |
8
MENU DISPLAY INFORMATION AND OPERATION
8.1
Automatic Film applicator operation
TQC Start screen after switched on.
Switch on instrument by mains switch at the right side on the
housing.
This is the first screen shown after switching on the instrument.
NOTE: The version number displayed is the firmware version
number.
RUN - Automatically the first selection screen or the
MAIN MENU appears
Press the Jog shuttle knob to start the sequence.
The applicator carrier bar is moved and set in position.
RUN - Positioning Chart
The current draw down speed as well as the length is shown in the
top of the display. Press the Jog shuttle knob to confirm or turn it
to go back in the menu and make changes.
Place the draw down chart on the glass plate or vacuum table.
Choose the appropriate applicator to fulfil the test.
RUN – Applicator and Paint applying
Apply just enough paint to fulfil the test on the test chart chosen.
Press the Jog shuttle knob to start the run or turn it to go back in the
menu and make changes. Display shows “Running”.
Keep your hands away from moving parts.
MAIN MENU – Run, Run setup, Instrument setup
In the main menu you can change parameters according to your
needs. Rotate the Jog shuttle knob to select and press to choose.
Follow the questions as they come.
RUN SETUP - Set Speed
Push the Jog shuttle knob to set the draw down speed.