User's Manual l TQMa335xL UM 0101 l © 2019, TQ-Systems GmbH
Page 35
6.6
Environment protection
6.6.1
RoHS
The TQMa335xL is manufactured RoHS compliant.
•
All components and assemblies are RoHS compliant
•
The soldering processes are RoHS compliant
6.6.2
WEEE
®
The final distributor is responsible for compliance with the WEEE
®
regulation.
Within the scope of the technical possibilities, the TQMa335xL was designed to be recyclable and easy to repair.
6.7
REACH
®
The EU-chemical regulation 1907/2006 (REACH
®
regulation) stands for registration, evaluation, certification and restriction of
substances SVHC (Substances of very high concern, e.g., carcinogen, mutagen and/or persistent, bio accumulative and toxic).
Within the scope of this juridical liability, TQ-Systems GmbH meets the information duty within the supply chain with regard to
the SVHC substances, insofar as suppliers inform TQ-Systems GmbH accordingly.
6.8
EuP
The Ecodesign Directive, also Energy using Products (EuP), is applicable to products for the end user with an annual quantity
>200,000. The TQMa335xL must therefore always be seen in conjunction with the complete device.
The available standby and sleep modes of the components on the TQMa335xL enable compliance with EuP requirements for the
TQMa335xL.
6.9
Battery
No batteries are used on the TQMa335xL.
6.10
Packaging
By environmentally friendly processes, production equipment and products, we contribute to the protection of our
environment. To be able to reuse the TQMa335xL, it is produced in such a way (a modular construction) that it can be easily
repaired and disassembled. The energy consumption of this subassembly is minimised by suitable measures. The TQMa335xL is
delivered in reusable packaging.
6.11
Other entries
The energy consumption of this subassembly is minimised by suitable measures.
Because currently there is still no technical equivalent alternative for printed circuit boards with bromine-containing flame
protection (FR-4 material), such printed circuit boards are still used.
No use of PCB containing capacitors and transformers (polychlorinated biphenyls).
These points are an essential part of the following laws:
•
The law to encourage the circular flow economy and assurance of the environmentally
acceptable removal of waste as at 27.9.94
(Source of information: BGBl I 1994, 2705)
•
Regulation with respect to the utilization and proof of removal as at 1.9.96
(Source of information: BGBl I 1996, 1382, (1997, 2860))
•
Regulation with respect to the avoidance and utilization of packaging waste as at 21.8.98
(Source of information: BGBl I 1998, 2379)
•
Regulation with respect to the European Waste Directory as at 1.12.01
(Source of information: BGBl I 2001, 3379)
This information is to be seen as notes. Tests or certifications were not carried out in this respect.