User's Manual l TQMLS10xxA UM 0105 l © 2022, TQ-Systems GmbH
Page 25
5.3
TQMLS10xxA connectors
The TQMLS10xxA is connected to the carrier board with 420 pins on four connectors.
The following table shows details of the connector assembled on the TQMLS10xxA.
Table 13:
Connector assembled on TQMLS10xxA
Manufacturer
Part number
Remark
TE connectivity
60-pin: 5177985-2
120-pin: 5177985-5
•
0.8 mm pitch
•
Plating: Gold 0.2 µm
•
–40 °C to +125 °C
The TQMLS10xxA is held in the mating connectors with a retention force of approximately 42 N.
To avoid damaging the TQMLS10xxA connectors as well as the carrier board connectors while removing the TQMLS10xxA
the use of the extraction tool MOZI52XX is strongly recommended. See chapter 5.8 for further information.
Note: Component placement on carrier board
2.5 mm should be kept free on the carrier board, on both long sides of the TQMLS10xxA
for the extraction tool MOZI52XX.
The following table shows some suitable mating connectors for the carrier board.
Table 14:
Carrier board mating connectors
Manufacturer
Pin count / part number
Remark
Stack height (X)
TE connectivity
60-pin:
5177986-2
120-pin:
5177986-5
On MBLS10xxA
5 mm
(carrier board)
X
Plug
Receptacle
(TQ-Module)
60-pin: 1-5177986-2
120-pin: 1-5177986-5
–
6 mm
60-pin: 2-5177986-2
120-pin: 2-5177986-5
–
7 mm
60-pin: 3-5177986-2
120-pin: 3-5177986-5
–
8 mm
