Biostar M6VLR Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 71

background image

M6VLR

Federal Communications Commission
(F.C.C.) Statement

This device complies with Part 15 of the FCC Rules. Operation of this device is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Accessories: This device has been tested and found to comply with the limits of a
Class B digital device; the accessories associated with this equipment are as
follows:
    1. Shielded serial cable. (Can be obtained from multiple retail outlets)
    2. Shielded printer cable. (Can be obtained from multiple retail outlets)
    3. Shielded video cable. (Can be obtained from multiple retail outlets)
    4. Shielded power cord. (Provided by manufacturer)
These accessories are required to ensure compliance with FCC Rules. It is the
responsibility of the user to provide and use these accessories properly.

This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient / relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.

1
2
3
...
»

Содержание M6VLR








































































Отзывы:

Нет отзывов

Похожие инструкции для M6VLR

Бренд: Xilinx Страницы: 14

Бренд: Portwell Страницы: 7

Бренд: Aaeon Страницы: 40

SuperServer SYS-E102-9AP-LN4-C

Бренд: Supermicro Страницы: 81

IONITX-N series

Бренд: Zotac Страницы: 50

Бренд: Gigabyte Страницы: 40

Бренд: MINN KOTA Страницы: 16

Бренд: Intel Страницы: 36

Бренд: Supero Страницы: 105

Бренд: Alinx Страницы: 29

Бренд: Supermicro Страницы: 88

Бренд: Gigabyte Страницы: 2

Бренд: JETWAY Страницы: 48

Бренд: MSI Страницы: 148

Бренд: Atmel Страницы: 74

Бренд: Foxconn Страницы: 106

ACT2861EVK1-201

Бренд: Active-semi Страницы: 19

Бренд: Motorola Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды