Biostar M6VLR Скачать руководство пользователя страница 10

Страница: 10 / 71

Chapter

Motherboard

Description

1-5

DVD

−

Hardware-Assisted MPEG-2 Architecture for DVD with AC-3.

−

Simultaneous motion compensation and front-end processing
(parsing,decryption and decode).

−

Supports full DVD 1.0,VCD 2.0 and CD-Karaoke.

−

Microsoft DirectShow 2.x native support,backward compatible to MCI.

−

No additional frame buffer requirements.

−

Dynamic frame and field de-interlace filtering for high quality playback
on VGA monitors(Bob and Weave).

−

Tamper-proof software CSS implementation.

−

Freeze,Fast-Forward, Slow Motion, Reverse.

−

Pan-and-Scan support for 16:9 Sequence.

Super I/O Built-in onboard

−

Support one multi-mode Parallel Port.

(1) Standard & Bidirection Parallel Port (SPP).
(2) Enhanced Parallel Port (EPP).
(3) Extended Capabilities Port (ECP).

−

Supports one serial port, 16550 UART with 16 byte FIFO.

−

UART data rates up to 1.5 Mbaud.

−

Supports one Infrared transmission (IR) port.

−

Supports PS/2 Mouse.

−

Supports 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB floppy disk
drives.

Direct Sound Ready AC97 Digital Audio Controller

−

Dual full-duplex Direct Sound channels between system memory and
AC97 link.

−

PCI master interface with scatter / gather and bursting capability.

−

32 byte FIFO of each direct sound channel.

−

Host based sample rate converter and mixer.

−

Standard v2.1 AC97 Codec interface for single or cascaded AC97
Codec's from multiple vendors.

−

Loopback capability for re-directing mixed audio streams into USB
speakers.

Содержание M6VLR








































































Результаты поиска

Содержание M6VLR

Отзывы:

Похожие инструкции для M6VLR

Бренды по названию

Популярные бренды

Biostar M6VLR, Руководство пользователя

Результаты поиска

Содержание M6VLR

Отзывы:

Похожие инструкции для M6VLR

Бренды по названию

Популярные бренды