TPS WP-82 Скачать руководство пользователя страница 6

Страница: 6 / 48

Page 6

Press to record readings into memory. See section 9.1.

Also used to switch the Altitude or Atmospheric Pressure Correction
system on or off. See section 7.1.

Press to show or hide the date, time and Altitude or Pressure. See
section 14.2.

Press to start or stop automatic logging. See section 10.

Alternatively, press to transmit current reading plus date and time to
the RS232 port. See section 11.2.

Only used within the menu system on the

WP-82Y

Press to access the user-friendly menu system which makes the

WP-82Y

easy to operate.

and

The

and

keys are used for calibrating temperature readout

(section 5.1), setting the clock (section 14.1), setting the automatic
logging period (section 10), and displaying GLP information (section
8.1).

The

key is also used to initialise the

WP-82Y

at turn-on. See

section 15.

Switches the

WP-82Y

on and off.

Display

32 character alpha-numeric display with user-friendly menu and
prompting

system.

Shows

Dissolved

Oxygen,

Temperature

simultaneously. Date, time, manual salinity value, altitude or pressure
can also be displayed.

Содержание WP-82

















































Результаты поиска

Содержание WP-82

Отзывы:

TPS WP-82, Руководство пользователя, Страница: 6 / 48

Результаты поиска

Содержание WP-82

Отзывы: