Page 26
10. Automatic Data logging
The
WP-82Y
can automatically log records into the Notepad. First the
logging period must be programmed, then automatic logging can be
started and stopped as required. The clock must be set before attempting
Automatic Data logging.
1. Select the Program menu (
F2:Notepad
F4:Prog.
).
2. The data logging
program menu is now displayed. For example…
>00< F1:Min F2:Sec
:Period F3:Hr
3. Use the
and
keys to set the period at which the
WP-82Y
will
automatically log records.
4. Use the
and
keys to set the period at which the
WP-82Y
will
automatically log records.
5. When the logging period has been correctly set, select whether this
period is in minutes or seconds.
Press
to save the period as minutes.
Press
to save the period as seconds.
Press
to save the period as hours.
eg: If the period was set to
05
, followed by
, then the
WP-82Y
will
automatically log a record every 5 seconds.
6. The
WP-82Y
will ask if the records are to be logged into the
Notepad, or sent directly to the RS232 port.
Press
to log records into the Notepad (maximum of 3600
readings).
Press
to send records directly to the RS232 port.
7. The automatic logging function is now programmed, and can be
started and stopped as required.
Continued over the page…