TPS WP-80M Скачать руководство пользователя страница 36

Страница: 36 / 46

Page 36

15. Clock Function

15.1 Setting the Clock

1. Select the Clock Set-up menu (

→

F4:Setup

→

F2:Clock

2. The display now shows the current date and time. The cursor starts at

the day. For example…

31/12/10 12:00
F1:< F2:>

↑

↑↓

↓

:Set

Press the

and

keys until the day is correct.

3. Press

to move to the month. Press the

and

keys until the

month is correct.

4. Press

to move to the year. Press the

and

keys until the

year is correct.

5. Press

to move to the hour. Press the

and

keys until the

hour is correct.

6. Press

to move the cursor to the minutes. Press the

and

keys until the minutes are correct.

7. Check that the date and time are correct.

Press

to save the settings.

If any changes are needed, press the

key to move left to the

desired position.

Press

to quit without resetting the clock.

Notes

1. The

WP-80M

does not test for a valid day of the month when setting

the clock (eg: attempting to enter 31/02/10 is not corrected).

2. The

WP-80M

does test for leap years.

15.2 Displaying or Hiding the Clock

The date and time are normally displayed along with the pH or mV/ORP
and Temperature readings. Press

in normal display mode to

alternatively display or hide the clock. When Relative mV/ORP is
selected, the

key alternatively displays the clock or absolute mV/ORP.

Содержание WP-80M















































Результаты поиска

Содержание WP-80M

Отзывы:

TPS WP-80M, Руководство пользователя, Страница: 36 / 46

Результаты поиска

Содержание WP-80M

Отзывы: