Page 24
10.3 Recording Readings into the Notepad – Extra Data Entry
This section is applicable when the Extra Data Entry function is
enabled. See section 4.2 for details.
To record readings into the Notepad memory with Extra Data Entry :
1. Press
in normal display mode. The display should now look like
this:
# 1 >_ , <
F1:< F2:>
↑
↑
↑
↑↓
↓
↓
↓
:Set
2. Press the
and
keys to scroll through from 0 to 9, then A to Z to
set the first character of the data entry.
Press
to move to the next character.
3. Repeat step 2 for the remaining characters.
Press
to move the cursor left to make any corrections.
Any of the characters may be left blank, if required.
4. When setting the last character, the display changes, to indicate that
one more press of the
will save the data. For example :
# 1 >123,ABCD<
F1:< F2:End
↑
↑
↑
↑↓
↓
↓
↓
:Set
5. Press
to save the data.
Alternatively, press
to quit without recording the data.
6. The meter now returns to pH and Temperature measurement, with a
prompt to press
to record the pH and Temperature data.
For example…
7.00pH 25.0
O
c
F1: 1 12:00:00
Press
to record the data. It will be identified with the 7 character
identifier, as entered previously.
Alternatively, press
to quit without recording the pH and
Temperature data,
AND
the previously entered identifier.