Section 3 – Operating Instructions
20
3.7
Pumping to Waste
From time to time, all pool users need to pump some water to waste. This is normally the case
when there has been heavy rainfall. The advantage of using the
easyCHEM 770
to control the
Pump to Waste function is that the unit will not add any chemicals while the water is being pumped
to waste. Better for the environment, better for your budget ! To pump to waste…
1. Press to display the Pump Timer menu.
Pool Pump
>Timed <
↓
2. Press until ‘
>To Waste <
’ is selected and press
. The following screen is displayed…
Set filter to
Waste Enter
The pool pump is now switched OFF. Set the control on your filter to its “Pump to Waste”
setting, then press
.
3. The pool pump is now pumping pool water to waste. The following screen is displayed…
Pumping to Waste
Enter Stops
Press
to stop the pool pump.
4. The
easyCHEM 770
now prompts you to return the pool filter to its normal filtration setting…
Re-set filter to
Normal Enter
Re-set the filter, then press
.
5. The
easyCHEM 770
displays the following message before returning to the normal pump
timer cycle and chemical dosing…
Resuming Pump
Cycle & Dosing
Notes
1. The pool pump will remain ON until the user presses
to stop it. Care must be taken to
avoid pumping too much pool water to waste.
