TPR TPR UniLock Скачать руководство пользователя страница 10

Страница: 10 / 44

4111-0072 — Dec. 2018

Technical Service at 800-643-5424 or [email protected]

This manual provides current information on the TPR

UniLock® vehicle restraint. Due to ongoing product

improvement, some parts may have changed, along

with operation and troubleshooting methods. This

manual describes these changes where applicable.

The TPR UniLock is the only trailer-postioned vehicle

restraint that can automatically remove “RIG Wedge”

pressure. RIG Wedge is caused when the trailer

is pushed forward during loading/unloading and

the trailer’s Rear Impact Guard (RIG) applies so

much pressure to the restraint’s hook that the truck

driver must reverse the trailer in order to release

the restraint. The UniLock has an advanced cam

design that first rotates the hook away from the RIG

to remove the pressure, and then rotates down to a

stored position.

The UniLock vehicle restraint also has an internal

safety mechanism that locks the restraint’s hook in

place when pressure is applied, maintaining a secure

engagement. This makes it universally effective on

any obstructed Rear Impact Guard (RIG), including

intermodal trailers with cover plates that prevent the

restraint’s hook from latching on top of the RIG.

The UniLock is designed to withstand a pulling force

in excess of 32,000 lbs, and has a service range of 4”

to 10” horizontally from the face of the dock bumpers

and 9” to 30” vertically above drive approach. The

integral motor, gear and brake assembly is specifically

designed for the UniLock. The UniLock vehicle

restraint is highly adaptable to new or existing loading

docks.

To illustrate which connections are to be made in the

field at installation, electrical drawings are included

with each order or by contacting Systems, LLC

Technical Services.

Call Systems, LLC to discuss available options to

meet your specific needs.

General Information

Figure 3

INTRODUCTION

Содержание TPR UniLock













































Результаты поиска

Содержание TPR UniLock

Отзывы:

Похожие инструкции для TPR UniLock

Бренды по названию

Популярные бренды

TPR TPR UniLock, Инструкция для владельца и пользователя

Результаты поиска

Содержание TPR UniLock

Отзывы:

Похожие инструкции для TPR UniLock

Бренды по названию

Популярные бренды