TPR TPR UniLock Скачать руководство пользователя страница 9

Страница: 9 / 44

8) When goods are transferred between the loading

dock and a trailer resting on its support legs/

landing gear instead of a tractor fifth wheel

or converter dolly, it is recommended that an

adequate stabilizing device or devices shall be

utilized at the front of the trailer.

9) In order to be entitled to the benefits of the

standard product warranty, the dock safety

equipment must have been properly installed,

maintained and operated in accordance with

all manufacturer’s recommendations and/

or specified design parameters and not

otherwise have been subject to abuse, misuse,

misapplication, acts of nature, overloading,

unauthorized repair or modification, application in

a corrosive environment or lack of maintenance.

Periodic lubrication, adjustment and inspection

in accordance with all manufacturers’

recommendations are the sole responsibility of the

owner/user.

10) Manufacturer’s recommended maintenance

and inspection of all restraining devices shall

be performed in conformance with the following

practices: A planned maintenance schedule

program must be followed, only trained and

authorized personnel shall be permitted to

maintain, repair, adjust and inspect restraining

devices, and only the use of original equipment

manufacturer parts, manuals, maintenance

instructions, labels, decals and placards or

their equivalent. Written documentation of

maintenance, replacement parts or damage

should be kept. In the event of damage,

notification to the manufacturer is required.

11) Restraining devices that are structurally damaged

shall be removed from service, inspected by a

manufacturer’s authorized representative, and

repaired or replaced as needed or recommended

by the manufacturer before being placed back in

service.

OWNER’S/USER’S RESPONSIBILITIES

4111-0072 — Dec. 2018

Содержание TPR UniLock













































Результаты поиска

Содержание TPR UniLock

Отзывы:

Похожие инструкции для TPR UniLock

Бренды по названию

Популярные бренды

TPR TPR UniLock, Инструкция для владельца и пользователя

Результаты поиска

Содержание TPR UniLock

Отзывы:

Похожие инструкции для TPR UniLock

Бренды по названию

Популярные бренды