INSTALLATION INSTRUCTIONS
INBUILT DUPLEX RECEPTACLE
CAUTION:
Disconnect supply service to baseboard and receptacle to avoid electrical shock. All
wiring connections must conform to National Electric Code and Local Codes having
jurisdiction.
NOTE: The receptacle must be conncted to a branch circuit, other than the baseboard heater
circuit, having over current protection in accordance with the National Electric Code.
1.The receptacle cover assembly can be mounted in the left or right hand junction box.
2.Remove baseboard heater junction box cover and retain screw.
3.Attach the 120V branch supply leads and ground lead the receptacle. Use copper conductors
only.
4.Install receptacle cover assembly to the baseboard junction box, secure with previously removed
screw.
5.Restore power and check for proper operation.
FORM: 9926