TPC LED 70N Скачать руководство пользователя страница 8

6. MAINTENANCE

1. Be sure there is no resin or material sticking to the surface of the light guide.

2. If materials are sticking on the light guide immediately clean it with soft cloth. Keep light guide clean for better  

     light intensity and curing performance.

3. The light guide should be sterilized after each use. It can be safely autoclaved at 121 °C. For no more then  15    

     minutes. Let cool before handling.

4. The other accessories such as curing light hadpiece and eye protector should be scrubbed with pure water and   

     sheathed in accordance with standard disinfection procedures.

5. Keep curing light handpiece in charging station while not in use.

6. Dispose Lithium battery according to the federal and state laws. 

7. The User should wear colored protection glasses to avoid eyes injury due to LED light. 

Warranty Information

All of our products sold are guaranteed to be free from defects in workmanship and materials for a 1 year from 

date of purchase, unless otherwise stated. TPC will repair or replace any defective part at no charge. During the 

warranty period. TPC will not be responsible for labor charges or shipping charges to / from the TPC facility. 

This guarantee does not cover normal wear or stains on surface finish. The guarantee does not cover damage 

resulting from improper installation or misuse. All claims against the freight carrier must be initiated at the time 

the damaged items are received. The claim is the responsibility of the customer. We are improving our products 

on a continuous basis. We reserve the right to make modifications without the need for prior notification and 

are not obligated to modify previously manufactured items. Light guides and batteries are not covered under any 

type of warranty.

6

Содержание LED 70N










Отзывы: