1.INTRODUCTION
Thank you for purchasing the LED 70N curing light . The LED 70N
is a dental curing light which uses the latest
LED technology to polymerize composite resin
Caution
Attention: Important information is being presented. Refer to the Operator’s Manual for more informa
tion.
High intensity Light: Protect your eyes from the light generated by this product
Shock Hazard: Beware of electrical shock or injury. Type B Applied Part
Class II Medical Equipment
Electronics Waste: Properly dispose of when use is discontinued.
1.1 Technical Information
Range of Light (in nm)
430 - 490 nm
Light Intensity at the Tip (mW/cm2)
2,000 mW
Battery Life
200 cycles at STANDARD mode, 10 seconds per cycle;
135 cycles at STANDARD mode, 20 seconds per cycle.
Charging Time to Complete
5 Hours
Battery Type
Lithium Ion 7.4V dc 2500mAh
Cradle Battery
Rechargeable
Operating Temperature
15 - 30°C (60 - 86°F); Unit turns off automatically when
the temperature at the wand tip reaches 48° C
Power Input, Curing Light
9.0 VDC @ 2.4 A
Power Input, Power Supply
100 - 240 VAC @ 50 - 60 Hz
Pulse Rate
10 Hz
Pulse Duty Cycle
50%
Storage and Transport Conditions
0 - 40°C (32 - 104°F)
0 - 100% RH
-1000 to + 9000 meters elevation
1