B. Set Timer
Press function switch to select curing time between 5, 10, 20, 30, and 40 seconds.
• When choosing PULSE or RAMP, the curing time will start at 10 seconds automatically.
C. Start to Operate
Press curing switch to begin curing program. To interrupt a program, just press curing switch again. When the
curing program is complete the curing light handpiece will beep and then turn off the light immediately.
D. Wake Up from Sleeping Mode
The curing light will turn into sleeping mode automatically when it is no longer in using for 3 minutes. Press
function switch or curing switch once to activate curing light.
E. Low Battery Sign
When the
is blinking, the curing light handpiece should be recharged immediately or directly connected to
the power sypply for continued use.
F. Turn off the Power
The curing light handpiece will achieve sleeping mode automatically. This will shut down all the curing function
to save the power. User may de-activate curing light by disconnecting the battery terminals from the battery.
G. Radiometer
Place the light guide against the detective spot on the radiometer. The meter will measure the intensity of LED
curing light and display the intensity on the LCD display.
• The output reading from the radiometer is a reference for the user to adjust to appropriate curing time.
The radiometer is designed to test LED output only.
5