4. Installation
Connect power adaptor to
the charging base.
Remove protective battery
covers.
Place batteries in the
charging base.
Attach battery to light
handpiece.
Insert light guide.
Attach light shield.
1. Light intensity
tester
2. Battery Charging
indicator
3. Light intensity
indicator
Charging base indicators
1. light intensity sensor. Place the light guide on
this sensor to verify there is sufficient light to cure.
If there is sufficient light and battery power the
light sensor will illuminate “purple”. If there is not
sufficient light, power or the light guide is damaged
or dirty the light indicator will illuminate “red”.
2. Battery charging indicators. When flahing red
the batteries are charging. When the light is solid
“green” the batteries are fully charged.
3. light sensor indicator. This light is only activted
when the light intensity sensor is being used. A
“purple” light indicates that there is sufficient
power to cure. A “red” ligh indicates that there is
not suffcient power to cure. Possible reasons for a
“red” light are Low battery, Damaged / dirty light
guide or damaged LED.
4.1 Charging Base
4