TPC LED 55N Скачать руководство пользователя страница 5

Страница: 5 / 9

1. Curing Light Handpiece

2. Charging Base

3. Oval Protector

4. Light guide

PN: LED55HP

LED55Base

PN: P219

PN: P109

5. Switching Power Adapter

6. Function Switch

7. Battery

PN: LED55N-TF

PN: LED55-BTN

PN: LED55-BATT

3. Accessories

4. Installation

Step 1 : Connect Power Adapter to charging base.

Step 2 : Remove protective battery contact covers.

Step 3: Place the batteries in the charging base. Allow the batteries to fully charge.

For the best performance, charge curing light handpiece continually for 4 hours (charge battery at least 8

hours for first time using). The battery indicator on the charging base will show the sign of full power when

battery is fully charged. LED 55N will detect the charging automatically. There will be one short beep tone

generated when it has been properly put on to the Charging Base.

Step 4 : After charging is complete attach one battery to the handpiece. Align the threads of the battery to the

back of the handpiece and turn clockwise to fasten. Be sure not to over tighten the battery to the handpiece.

Step 5 : Install light guide into the handpiece. Directly insert it onto the front of the curing light handpiece. The

light guide can be rotated after installation.

Step 6 : Place the light shield over the light guide. Verify it is secure on the silver chuck of light guide.

Содержание LED 55N









