TPC ERN 22, Руководство пользователя

Страница: 30 / 78

CYCLE
TYPE OF
CYCLE
TYPE OF
ContFAST ContFAST
ContSLOW ContSLOW
STOP STOP
END END
End of program
By pressing START-button, program is restarted
and step 1 is running.
Cycle stop
After step finish, program stops and the next step is
activated by START-button.
Continual cycle with deceleration
After step finish, program starts the next step
automatically, without pressing the START-button.
Winding step decelerates to zero, at first.
Continual cycle without deceleration
After step finish, program starts the next step
automatically, without pressing the START-button.
Spindle deceleration is canceled. Only winding steps
can be joined by this cycle.
Type of cycle
Set the type of cycle and choose, how to continue to the next step.
CYCLE
TYPE OF
CYCLE
TYPE OF
ENTER
27 / ERN C
Step: Step:
1 1
PROGRAMMING
ContSLOW
CYCLE
PROGRAMMING
ContSLOW
CYCLE
Enter type of cycle ! Enter type of cycle !
ContFAST ContFAST
STOP STOP
END END
STOP STOP
LAYER LAYER
CANCEL CANCEL
Step : Step :
1 1
Turns: 780.00
L.Rev: 10.0 R.Rev: 60.0
Speed: 4000 Acc/Dec: 22
Pitch: 0.300
Cycle: Shield: CLOSE
Turns: 780.00
L.Rev: 10.0 R.Rev: 60.0
Speed: 4000 Acc/Dec: 22
Pitch: 0.300
Cycle: Shield: CLOSE
1: L - L NA 1: L - L NA
2: L - L NA 2: L - L NA
3: L - L NA 3: L - L NA
4: L - L NA 4: L - L NA
PEDAL : Pedal speed value taken from program ! PEDAL : Pedal speed value taken from program !
TM TM
WINDING WINDING