5.9 WINDING CORRECTIONS
Program corrections and adjustments are allowed only in the state "STANDSTILL" or
"Winding STOP". Keys are blocked in other states. When there is peep warning after the
key pressing, the operation is illogical or inaccessible.
5.9.1 Spindle reference position setting
The spindle can be positioned in the range +- a few degrees and exact position
is kept for any amount of windings.
Reference (zero) spindle position is set up by follows:
- switch the brake-off by the switch (6)
- turn the spindle manually to the required position and return the switch (6) to the former position
- press RESET then ENTER
Note: When you switch the machine ON (by switch POWER or EMERGENCY STOP),
RESET is running automatically and the spindle position is taken as reference position.
5.9.2. Wire guide relative position setting
This correction shifts zero coordinate of the wire guide ( relative zero position). It allows you to correct
the wire gude position to be in accordance with the bobbin or winding tool.
Default : 5 mm
re
la
ti
v
e
p
o
s
it
io
n
9
m
m
re
la
ti
v
e
p
o
s
it
io
n
5
m
m
re
la
ti
v
e
p
o
s
it
io
n
1
m
m
the same wire guide coordinate depending up relative position
relative zero
0 0 0
14 / ERN C
