TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 45 -
¾
Enabled AP Isolation -
This function can isolate wireless stations on your network from
each other. Wireless devices will be able to communicate with the Router but not with each
other. To use this function, check this box. AP Isolation is disabled by default.
)
Note:
If you are not familiar with the setting items in this page, it's strongly recommended to keep
the provided default values; otherwise it may result in lower wireless network performance.
4.6.5 Wireless Statistics
Choose menu “
Wireless
→
Wireless Statistics
”, you can see the MAC Address, Current Status,
Received Packets and Sent Packets for each connected wireless station.
Figure 4-25 Wireless Statistics
¾
MAC Address -
The connected wireless station's MAC address
¾
Current Status
-
The connected wireless station's running status, one of
STA-AUTH/
STA-ASSOC/ STA-JOINED/ WPA/ WPA-PSK/ WPA2/ WPA2-PSK/ AP-UP/ AP-DOWN/ Disconnected
¾
Received Packets
-
Packets received by the station
¾
Sent Packets
-
Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the
Refresh
button.
If the numbers of connected wireless stations go beyond one page, click the
Next
button to go to
the next page and click the
Previous
button to return the previous page.
)
Note:
This page will be refreshed automatically every 5 seconds.
