TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 21 -
Figure 4-2 WPS
¾
WPS Status -
Enable or disable the WPS function here.
¾
Current PIN -
The current value of the Router's PIN is displayed here. The default PIN of the
Router can be found in the label attached on the router.
¾
Restore PIN -
Restore the PIN of the Router to its default.
¾
Gen New PIN -
Click this button, and then you can get a new random value for the Router's
PIN. You can ensure the network security by generating a new PIN.
¾
Disable Device’s PIN -
You can disable the Router’s PIN manually here. If the router
receives multiple failed attempts to authenticate an external registrar, this function will be
disabled automatically.
¾
Add Device -
You can add a new device to the existing network manually by clicking this
button.
b). To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and Router using either Push Button Configuration (PBC)
method or PIN method.
)
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Use this method if your client device has a Wi-Fi Protected Setup button.
Step 1:
Press the WPS/RESET button on the back panel of the Router for one second.
You can also keep the default WPS Status as
Enabled
and click the
Add Device
button
in Figure 4-2, then Choose “
Press the button of the new device in two minutes
” and
click
Connect
. (Shown in the following figure)
