TL-WR702N
150Mbps Wireless N Nano Router
- 80 -
To setup a virtual server entry:
1. Click
the
Add New…
button, the next screen will pop-up as shown in Figure 5-28.
2. Select the service port you want to use from the
Common Service Port
list. If the
Common
Service Port
list does not have the service that you want to use, type the service port
number or service port range in the
Service Port
box.
3. Type the IP Address of the computer in the
IP Address
box.
4. Select the protocol used for this application, either
TCP
,
UDP
, or
All
.
5. Select
the
Enable
to enable the virtual server.
6. Click
the
Save
button.
Figure 5-28 Add or Modify a Virtual Server Entry
)
Note:
If your computer or server has more than one type of available service, please select another
service, and enter the same IP Address for that computer or server.
To modify or delete an existing entry:
1. Click
the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click
the
Save
button.
Click the
Enable/Disabled All
button to make all entries enabled/disabled.
Click the
Delete All
button to delete all entries.
Click the
Next
button to go to the next page and click the
Previous
button to return the previous
page.
