TL-WR702N
150Mbps Wireless N Nano Router
- 115 -
6.6.1 Wireless Settings
Choose menu “
Wireless
→
Wireless Settings
”, and then you can configure the basic settings
for the wireless network on this page.
Figure 6-8 Wireless Settings - Repeater
¾
SSID -
The SSID of AP that you want to access.
¾
MAC of AP -
The MAC address of AP that you want to access.
¾
Region
-
Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
¾
Survey -
Click this button, you can search the AP which runs in the environment.
¾
WDS Mode -
This field determines which WDS Mode will be used. It is not necessary to
change the WDS Mode unless you notice network communication problems with root AP. If
you select Auto, then Router will choose the appropriate WDS Mode automatically.
¾
Security Options -
This option should be chosen according to the security configuration of
the AP you want to access. It is recommended that the security type is the same as your AP’s
security type.
¾
WEP Key Index -
This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).
It indicates the index of the WEP key.
