9
Chapter 2
Initial Use
the top floor. So I bought a new powerline extender to extend
the wireless network.
1.
Plug the new powerline extender into a wall socket near one
of the existing powerline extender.
New Powerline Extender
TL-WPA7510
Existing Powerline Device
(For demonstration only)
Pow
erline
1000Mbps
100
0Mbps
2.
Check the new extender’s Powerline LED . Is it on?
• If it is on, follow Step
4
>
A
.
• If it is off, follow Step
3
and Step
4
>
B
.
3.
Join the new powerline extender into the existing powerline
network by pairing two powerline devices.
a . Press the Pair button on the existing powerline device for
1 second. The Power LED starts blinking.
Note: If the Power LED does not blink, press again.
b . Within two minutes, press the Pair button on the new
powerline extender for 1 second. The Power LED starts
blinking. When the Powerline LED turns solid, the pairing
process is complete.
within 2 minutes
Existing
Powerline Device
New Powerline
Extender
TL-WPA7510
Blinking
1000Mbps
Pair
LED
Wi-Fi
Reset
On
Blinking
1000Mbps
Pair
LED
Wi-Fi
Reset
4.
Relocate the new extender to the Wi-Fi “dead” zone.
Note: A red Powerline LED indicates poor signal strength. Move the extender to
another location.
How can I
do that?
