TL-SC3000
3GPP Surveillance Camera
21
NO. Function
Description
1
IP Address / Port / User Name /
Password
Select the IP address of the desired network camera from
the drop-down list and check if the network information is
correct.
2
HDD Number / Channel
Specify the hard disk (HDD Number) and channel number
(Channel) within which have the video data you need.
3
Filter the recorded video by time
Specify the time range within which has the video data you
want in the “Start Time” and “End Time” columns.
4
Filter the recorded video by event
Select an event type from the event list. This list shows all
logs in the specified network storage device from the latest
to the earliest.
To quickly find the events you need, check or uncheck the
event type “System” / “Manual” / “Alarm” / “Motion”, and
select the log you want.
To view the earlier or later logs that are not shown in the
current page, click “Prev. Page” or “Next Page”.
To refresh the event list, click “Reload”.
5
File Path
Assign the location where the backup files are saved.
6
Simultaneous Playback
To view the backup images simultaneously when the
download process is in progress, select the checkbox
“Simultaneous Playback”. You will see the backup images
while the images are being downloaded to the PC or
notebook.
To simply backup images without previewing, deselect the
checkbox “Simultaneous Playback”. You will only see a
message box indicating the total time needed, the current
status and the saving location.
7
Download / Cancel
Click “Download” to start or “Cancel” to discard the video
backup.
5.3 Record Setting
Click “
” (Miscellaneous Control)
→
“
” (Record Setting) to go into the “Record Setting” page,
and you can set which type of the recording is enabled (Manual / Schedule / Motion / Alarm), and where
the recorded data / snapshots are saved.
