TL-SC3000
3GPP Surveillance Camera
9
Figure 3-7 Finish the installation
3.2 Assign an IP address and Access the Camera
Step 1. Install the Software
Place the supplied Video Viewer AP software CD into your DVD- / CD-ROM drive. The installation
process will automatically start. Follow the on-screen instructions to install the application programs.
After installation, a “Video Viewer” shortcut icon will be shown on your PC desktop.
Step 2. Connect the network camera to the Internet access via a RJ-45 network cable.
Step 3. Search the available IP address to login
Double-click “
” icon on your PC desktop to enter the Video Viewer control panel. By defaults, the
“Address Book” (
) panel will be displayed on the right side of the Video Viewer control panel.
Click ”
” (Search)
Æ
”
” (Refresh) to search the available IP address(es). The found
address(es) will be listed, and can be added into the address book by clicking ”
” (Add into
address book).
For details, please see “
” (Search) in the user manual.
Select the IP address you just added into the address book, and click “
” (Edit) to edit the
settings.
Double-click the IP address in the address book to login.
)
Note:
For detailed network settings under different network types (Static IP / PPPOE / DHCP), please refer to
“Network” and “DDNS” in the user manual.
If you cannot search any available IP address, please follow the instructions below.
Step 4. Add the IP address and other network settings to login
a) Double-click “
” icon on your PC desktop to enter the Video Viewer control panel. By defaults,
