-80-
¾
Service
Name:
Enter a name for the service. The name should not be more than 28
characters. The name will display in the drop-down list of Protocol on
Access Rule page.
Protocol:
Select the protocol for the service. The system predefined protocols
include TCP, UDP and TCP/UDP.
Dest. Port:
Enter the start and end ports to make a destination port range for the
service. The start port number cannot be greater than the end port
number.
¾
List of Service
You can view the information of the entries and edit them by the Action buttons.
Note:
The service types predefined by the system cannot be modified.
4.7 Services
4.7.1 PPPoE Server
The Router can be configured as a PPPoE server to specify account and IP address to users in LAN and
thus you can control the dial-up of users for a high efficiency in network management.
The PPPoE configuration can be implemented on
General
,
IP Address Pool
,
Account
,
Exceptional
IP
and
List of Account
pages.
4.7.1.1 General
On this page, you can configure PPPoE function globally.
Choose the menu
Services
→
PPPoE Server
→
General
to load the following page.
