TP-Link TL-R470T Скачать руководство пользователя страница 105

Страница: 105 / 118

-101-

Type the path and file name of the update file into the “File” field. Or click the <Browse> button to locate
the update file. Then click the <Upgrade> button to complete.

Note:

●

After upgrading, the device will reboot automatically.

●

To avoid damage, please don't turn off the device while upgrading.

●

You are suggested to backup the configuration before upgrading.

4.8.3 Statistics

4.8.3.1

Interface Traffic Statistics

Interface Traffic Statistics screen displays the detailed traffic information of each port and extra
information of WAN ports.

Choose the menu

Maintenance

→

Statistics

→

Interface Traffic Statistics

to load the following page.

Figure 4-63 Interface Traffic Statistics

The following items are displayed on this screen:

Interface Traffic Statistics

Interface:

Displays the interface.

Rate Rx

：

Displays the rate for receiving data frames.

Rate Tx:

Displays the rate for transmitting data frames.

Packets Rx:

Displays the number of packets received on the interface.

Packets Tx:

Displays the number of packets transmitted on the interface.

Bytes Rx:

Displays the bytes of packets received on the interface.

Bytes Tx:

Displays the bytes of packets transmitted on the interface.

Advanced WAN Information

Содержание TL-R470T























































































































Результаты поиска

Содержание TL-R470T

Отзывы:

Похожие инструкции для TL-R470T

Бренды по названию

Популярные бренды

TP-Link TL-R470T, Руководство пользователя

Результаты поиска

Содержание TL-R470T

Отзывы:

Похожие инструкции для TL-R470T

Бренды по названию

Популярные бренды