-36-
Password:
Enter the Password provided by your ISP. If you are not clear, please
consult your ISP.
Auth Server:
Enter the address of authentication server. It can be IP address or
server name.
Auth Domain:
Enter the domain name of authentication server. It's only required when
the address of Auth Server is a server name.
Auth Mode:
You can select the proper Active mode according to your need.
z
Manual: Select this option to manually activate or terminate the
Internet connection by the <Connect> or <Disconnect> button. It’s
optimum for the dial-up connection charged on time.
z
Always-on: Select this option to keep the connection always on.
The connection can be re-established automatically when it is
down.
MTU:
MTU (Maximum Transmission Unit) is the maximum data unit
transmitted by the physical network. It can be set in the range of
576-1500. The default MTU is 1500.
Upstream/Downstream
Bandwidth:
Specify the Upstream/Downstream Bandwidth for the port. To make
"Load Balance" and "Bandwidth Control" take effect, please set these
parameters correctly.
¾
BigPond Status
Status:
Displays the status of BigPond connection.
z
“Disabled” indicates that the BigPond connection type is not
applied.
z
“Connecting” indicates that the Router is obtaining the IP
parameters from your ISP.
z
“Connected” indicates that the Router has successfully obtained
the IP parameters from your ISP.
z
“Disconnected” indicates that the connection has been
manually terminated or the Router gets no response from your
ISP. Please ensure that your settings are correct and your
