Error! AutoText entry not defined.
Error! AutoText entry not defined.
User Guide
48
Figure 4-28
Usual Service Name:
The Router provides some common services. Select the one you
need.
User-defined Service Name:
If the service can not be found in the
Usual Service Name
drop-down list, just enter the name manually in this field instead.
Protocol:
The protocol used for this virtual server.
WAN Setting:
The WAN setting of this virtual server used; it can be interface and IP address.
Select a desired one, and then options available will change to offer the configuration.
WAN Interface:
The interface on which the virtual server used on WAN side
WAN IP Address:
The IP address which the virtual server used on WAN side. You can
access this IP and WAN port from WAN side to obtain the service.
WAN Port:
The open port on WAN side. It can be either a single port or a port range.
LAN Open Port:
The open port on LAN host. It can be either a single port or a port range.
LAN IP Address:
The IP address of the host which provides the service on LAN side.
Click the
Apply Changes
button to save your configuration.
Note:
If changes are made, after clicking
Apply Changes
button, a
Save
button will appear on the left
panel. You need to click the
Save
button to make your changes take effect.
