TP-Link TD-W8962ND, Руководство пользователя

Страница: 59 / 94

TD-W8962ND 300Mbps Wireless N ADSL2+ Modem Router User Guide
50
Figure 4-35
2. Enter the following data:
¾
Destination IP Address: The Destination IP Address is the address of the network or host
that you want to assign to a static route.
¾ Subnet Mask: The Subnet Mask determines which portion of an IP Address is the network
portion, and which portion is the host portion.
¾
Gateway: Here you should type the Gateway address correctly, and the option for
Interface will adopt the default Gateway address for the Static Route.
¾
Interface: Select the Interface name in the text box, or else, the default Use Interface will be
adopted for the Static Route.
¾ Status: Select Enabled or disabled from the drop-down list .
3. Click Save to save your settings as shown in Figure 4-35.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Edit as desired on the Edit column.
Click the Enable/ Disabled Selected button to make selected entries enabled/ disabled.
Click the Delete Selected button to delete selected entries.
4.8.3 RIP Settings
Choose “ Route Settings ” Æ “ RIP Settings ”, you can see the RIP (Routing Information Protocol)
screen which allows you to configure the RIP.
Figure 4-36
)
Note:
RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE).