TD-W8962ND
300Mbps Wireless N ADSL2+ Modem Router User Guide
47
Click the
Delete Selected
button to selected entries.
For example:
If you desire that the wireless station A with MAC address 00:1D:0F:11:22:33 and the
wireless station B with MAC address 00:0A:EB:00:07:5F are able to access the Modem Router, but
all the other wireless stations cannot access the Modem Router, you can configure the
Wireless
MAC Address Filtering
list by following these steps:
1. Click
the
Enable
button to enable this function.
2. Select the radio button “
Allow the stations specified by any enabled entries in the list to
access
” for
Filtering Rules
.
3. Delete all or disable all entries if there are any entries already.
4. Click
the
Add New
button.
1) Enter the MAC address 00:1D:0F:11:22:33/00:0A:EB:00:07:5F in the
MAC Address
field.
2) Enter wireless station A/B in the
Description
field.
3) Select
Enabled
in the
Status
drop-down list.
4) Click
the
Save
button.
5) Click
the
Back
button.
The filtering rules that configured should be similar to the following list:
4.7.5 Wireless Advanced
Choose menu “
Wireless
”
Æ
”
Wireless Advanced
”, you can configure the advanced settings of
your wireless network.
Figure 4-31
¾
Transmit Power:
Here you can specify the transmit power of Modem Router. You can select
High, Middle or Low which you would like. High is the default setting and is recommended.
¾
Beacon Interval:
Enter a value between 25-1000 milliseconds for Beacon Interval here. The
